Business VoIP Phone Systems, Solutions, & Equipment - 888VoipStore

While the Valcom paging and intercom devices can not be provisioned by the 3CX phone provisioning tool, they are not hard to set up at all, you just need to know the steps that you need to go through in order to get them to work properly. In this tutorial we walk through the creation [...]

The XR1000, XR2000, and XR3000 are a trixbox CE / Elastix Asterisk IP PBX systems supporting various combinations of telephony ports. The stand-alone base units may be equipped with up to 32 analog FXS/FXO ports, up to 4 T1/E1 ports (PRI, CAS or R2), and up to 8 BRI ports in a [...]

If you are adding a PRI connection (T1/E1/J1) to your trixbox CE system, setting up a Digium Digital Card such as the TE122P is very simple with trixbox CE. trixbox CE makes the process very easy with an included script, setup-pstn. Running the setup-pstn script will setup the underlying configuration files so that the card [...]

Many people don’t realize just how easy it is to configure a Digium analog interface card with trixbox CE. Not that it is very difficult with other distros, its usually only a few simple commands, but trixbox CE makes it even easier with one command that configures the card very easily. The same setup-pstn command [...]

Welcome to the latest evolution in Open Source communications. The technology that drives trixbox® Pro has been derived from Fonality’s commercial IP-PBX solution which is already deployed to thousands of business sites. This means it is market proven.(...)Read the rest of Overview of Fonality’s trixbox Pro IP PBX Platform (627 words) ...

The Digium® TDM410 is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines. Using Digium’s Asterisk® software and standard PC hardware, one [...]

The Wildcard TDM800P is a half-length PCI 2.2-compliant, 8 port card for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 8 lines. The TDM800P provides an industry first with 8 standard two-wire, RJ-11 interfaces on [...]

Digium® is the innovative force behind Asterisk®, the world’s most widely used open source telephony platform. In addition, Digium develops the software, hardware, and other components you’ll need to create a unified communications solution for a small or medium business. Share this on Facebook Digg this! ...

Even though many people really like the Cisco 7940/7960 phones and want to use them with third-party IP PBX platforms such as 3CX, trixbox CE, and trixbox Pro, Cisco does not want you to do this and it is an unsupported configuration. Secondly, the phones are extremely picky about their configuration files and only a [...]

While Cisco does not support using the 79xx series of phones on third-party IP PBX platforms such as Asterisk/trixbox, it is possible to get them to work with a little effort.  If you do not have the SIP firmware for the phones, this will be your biggest hurdle as the only way to get it [...]