Linksys Sipura SPA-3000

THE LINKSYS SIPURA SPA-3000 has been replaced by the SPA-3102 - please order this item and NOT the SPA-3000.  Thank you.


Linksys Sipura SPA-3000 - The SPA-3000 ( SPA3000 ) features the same VoIP adapter functionality found in the SPA1000 and SPA2002 with an additional benefit of an integrated connection for legacy telephone network hop-on, hop-off applications. SPA-3000 ( SPA3000 ) users will be able to leverage their broadband phone service connections more than ever by automatically routing local calls from cell phones and land lines to VoIP service providers and vice versa. If power is lost to the SPA-3000 ( SPA3000 ) or Internet service is down, calls can be redirected to a traditional carrier via the FXO interface.

The SPA-3000 ( SPA3000 ) delivers clear, high-quality voice communication in a variety of network conditions. Excellent voice quality in challenging, changeable IP network environments is made possible via our advanced implementation of standard voice coding algorithms. The SPA-3000 ( SPA3000 ) is interoperable with common telephony equipment like facsimile, voicemail, PBX/KTS and interactive voice response systems.

The SPA-3000 ( SPA3000 ) offers all the key features and capabilities with which service providers can provide customized IP services to their subscribers. The SPA-3000 ( SPA3000 ) can be remotely provisioned and supports dynamic, in-service software upgrades. A secure profile upload saves providers the time, expense and hassle of managing and pre-configuring or re-configuring customer premise equipment (CPE) for deployment.

SPA-3000 ( SPA3000 ) Features

• Telephony
• VoIP to PSTN (USA) Service Call Origination and Termination
• PSTN (USA) to VoIP Service Call Origination and Termination
• Single or Dual Stage Dialing
• Service Authentication via PIN, Digest, Caller ID (Bellcore Type 1)
• Per Call Authentication and Associated Routing
• Least Cost Routing Support
• Impedance Agnostics - 8 Settings
• Call Waiting, Cancel Call Waiting, Call Waiting Caller ID Detection (Bellcore Type 1)
• Caller ID with Name/Number (Multi-national Variants)
• Caller ID Blocking
• Call Forwarding to PSTN or VoIP Service: No answer, Busy, All
• Do Not Disturb
• Call Transfer
• Three-way Conference Calling with Local Mixing
• Message Waiting Indication - Visual and Tone Based
• Call Return
• Call Back on Busy
• Call Blocking with Toll Restriction
• Delayed Disconnect
• Distinctive Ringing - Calling and Called Number
• Off-hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold

SPA-3000 ( SPA3000 ) Specific

• Forward Calls to VoIP service - Selective, Authenticated, All
• Forward Calls to PSTN service - Selective, Authenticated, All
• PSTN Line Sharing with Multiple Extensions
• Automatic PSTN Fallback (Loss of Power or IP Service to Unit - with Quiescence to Normal Operations)
• Advanced Inbound and Outbound Call Routing
• Single Stage and Two Stage Dialing
• Independent Configurable Dial Plans - Up to 8
• Force PSTN Disconnection
• Sequential Dialing Support
  
  
• VoIP to PSTN Authentication and Routing
• VoIP to PSTN Gateway Enable/Disable
• VoIP Caller Auth Method (None, PIN, HTTP Digest)
• VoIP PIN Max Retry Setting
• One Stage Dialing Enable/Disable
• VoIP Caller ID Pattern Matching
• VoIP Access Allowed Caller List (No Further Authentication)
• VoIP Caller PIN and Associated Dial Plan
  
  
• PSTN to VoIP Authentication and Features
• PSTN to VoIP Gateway Enable/Disable
• Caller Auth Method: None, PIN, Caller ID
• Ring Through to FXS Enable/Disable
• Ring Through Tone - Configurable
• Caller ID (Bellcore 1) for VoIP Service Access
• Caller ID Enable/Disable
• PIN Max Retry Settings
• Access Allowed Caller List (No Further Authentication)
• Caller PIN and Associated Dial Plan
• Least Cost Routing (via Outbound VoIP - Line1 Dial Plan)

SPA-3000 ( SPA3000 ) FXO Behavior

• VoIP Answer Delay Timer
• PSTN Answer Delay Timer
• VoIP PIN Digit Time-Out Timer
• PSTN PIN Digit Time-Out Timer
• PSTN-to-VoIP Call Max Dur Timer
• VoIP-to PSTN Call Max Dur Timer
• PSTN Ring Through Delay Timer
• PSTN Dialing Delay Timer
• VoIP DIG Refresh Interval Timer
• PSTN Ring Time-out Timer
  
  
• PSTN Disconnection Detection
• CPC (Removal of Tip/Ring Voltage Momentarily)
• Polarity Reversal
• Long Silence (Confugrable Time Setting)
• Disconnect Tone (e.g. Reorder Tone)
  
  
• International Control
• FXO Port Impedance - Configurable to 16 settings
• Ring Frequency - Configurable
• SPA to PSTN and PSTN to SPA Gain Settings
• Ring Frequency - Maximum Setting
• Ring Validation Time Setting
• Tip/Ring Voltage Adjustment Setting
• Ring Indication Delay Setting
• Operational Loop Current Minimum Value
• Ring Time-out Setting
• On-Hook Speed Setting
• Ringer Impedance Setting
• Line-in-Use Voltage Setting