Sangoma A200 Analog Series

• 2 to 24 ports, FXO/FXS
• Voice hardware optimizations
• PCI or PCI Express
• 2U Form Factor
• RJ11 Phone Connectors
• Optional: Echo canceller

Sangoma A400 Analog Series

• 2 to 48 ports, FXO/FXS
• Voice hardware optimizations
• PCI or PCI Express
• High Density Form Factor
• Single DB25 connector
• Optional: Echo canceller

Sangoma A100 Digital Series

• 1 to 8 T1/E1/J1 Ports
• TDM Voice hardware optimizations
• Data IP hardware optimizations
• Full compliant T1 and E1 framing and line decoding
• PCI or PCI Express
• 2U Form Factor
• RJ45 Phone Connectors
• Optional: Hardware echo canceller

Sangoma A500 ISDN BRI Series

Sangoma's expandable BRI Card works without the signalling issues common in the market place.

• Each Base card supports from two up to six ISDN BRI Ports.
• Each port supports 2 ISDN lines, each with 2B and 1D Channels.
• PCI and PCI Express Compatible.
• Expands to 24-ports using up to three expansion Remora™ cards with only one PCI or PCI express slot.
• Half-height/2U Form Factor.
• RJ45 Connectors.
• Portsplitter cables included.
• Optional: Hardware echo canceller

Sangoma A301 T3/E3 Series

The Sangoma DS3 port version of AFT Hardware Series. Designed and optimized for data applications over T3.

• Single T3 (44.7 Mbps) and E3 (34.4 Mbps) Port
• Data IP hardware optimizations
• Full compliant T3 and E3 framing and line decoding
• PCI (only)
• 2U Form Factor
• Dual BNC Connectors

Sangoma S518 ADSL

• Single port ADSL card
• Designed and built to server standards of performance and reliability
• PCI or PCI Express
• Half-height/2U Form Factor
• ITU G.992.1 (G.DMT)
• ITU G.992.2 (G.Lite)
• ITU G.992 Annex A, Annex C
• ANSI T1.413 Issue 2

Sangoma S5141 Serial Series

• Single to Quad port serial card
• Primary serial V.35/X.21/RS232 port to 4Mbps
• Secondary serial V.35/X.21/RS232 port to 512kbps
• All modem control lines are monitored.
• 2U Form Factor
• PCI 32 bit (5v and 64 bit (3.3v) compatible.

Sangoma S514-5 56K Series

• 56kbps DDS card
• One 56/64kbps DDS line interface, one Secondary RS232 port to 128kbps for ISDN or dial backup
• 56kbps DDS compatible with Bellcore standards
• DMI: Receiving Data Mode Idle
• ZSC: Receiving Zero Code Suppression
• 2U Form Factor
• Designed and built to server standards of performance and reliability

Sangoma S5147 Dual E1/T1 PCI card

• Two integral E1(2.05mbps) or T1(1.54mbps) DSU/CSU ports
• PCI 32 bit (5v and 64 bit (3.3v) compatible.
• T1/E1 Status Alarms
• Software controlled DSU/CSU test modes.
• Remote monitoring of card and CSU/DSU operation

Sangoma S5148 Single E1/T1 PCI card

• One integral E1(2.05mbps) or T1(1.54mbps) DSU/CSU ports
• PCI 32 bit (5v and 64 bit (3.3v) compatible.
• T1/E1 Status Alarms
• Software controlled DSU/CSU test modes.
• Remote monitoring of card and CSU/DSU operation